ABC611 - CITROEN JUMPER REAR UPPER HINGE INDESTRUCTIBLE!

BRACKETS-REINFORCEMENT FIXINGS CRACKED FIXINGS of REAR DOOR UPPER HINGES:

- CITROEN JUMPER II / FIAT DUCATO III / Peugeot BOXER II

(2006-2017)

NEW, INDESTRUCTIBLE !!!

проблема: BREAKED HINGES?

SOLUTION: OUR INDESTRUCTIBLE REINFORCEMENT / BRACKETS !!!

Our repair kit consisting of 2 pcs (left + right) reinforcements / Hinge brackets for the rear door (top).

Due to the design flaws of the rear doors and their frequent opening and closing (it is, after all, a van), the doors are often повреждены - at the hinge mounting points. Дверь работает очень тяжело в местах, где она висит, и лист металла начинает трескаться !!!

спасибо нашим братьям-вы будете stiffen the entire structure on the hinges so that the probably does not repeat itself !!!

They can also be used in newer cars (in which the sheet metal does not break yet), чтобы предотвратить более поздние проблемы ...

brackets should be mounted between the body sheet and the hinge mounted with 2 bolts.

The BRACKETS can EASILY BE INSTALLED by TWO:

- by attaching / gluing The supports with glue glue (если вы не хотите сверлить отверстия в кузове автомобиля), The sheet metal surfaces should then be cleaned and degreased.

- Attaching the brackets to specific places in the door (which is the purpose of the profile bracket and mounting holes in them) and drilling этот holes with a diameter of 5mm in the door arm. После сверления отверстий, смазывайте автомобильные тела силиконом на суставе листа с кронштейном, а затем заклепки с заклепками с диаметром 5 мм.

после того, как вы связали брэкеты, все, что вам нужно, это отрегулировать хинги и задние двери и готово !!!

the entire assembly process quite simple and takes up to 2 hours. For assembly, you will also need: - a riveter, - а drill, 5mm drill, set of wrenches, - silicone, - 20 pieces (diameter 5mm.nit), - или glass glue.

BRACKETS are UNIVERSAL AND FIT ALL TYPES of DOORS (наклон: 180 ° and 270 °) !!!

APPLICATION:

- Citroen JUMPER II (2006-2017)

- FIAT DUCATO III (2006-2017)

- Peugeot BOXER II (2006-2017)

SET CONTAINS:

1 SET OR 2 PCS. Влево и вправо

Polish PRODUCT !!!

LOCATION OF the BRACKETS: