10pcs Spray Gun, Nozzle, Nozzle, Duckbill Seat, Nozzle Seat
Product parameters
Product name: Spray gun nozzle seat
Product material: Stainless steel PP
Product specification: M18.1.5 universal
Size: 5.8 cm wide, 6cm long
Product weight: 38g
scope of application: suitable for various High-Pressure Airless Spraying Machines
applicable Coatings: Paint, Latex Paint, etc
Packaging: 10 * Spray gun nozzle Seat
Usage Method:
1. Before the first use of spraying, The residue in the coating channel must be cleaned and placed in the gun jar
Add demolding materials and attempt to filter the interior of the spray gun once to ensure cleanliness
2. Adjust proper spraying pressure during spraying
3. Control the angle and distance between the spray gun and the spraying area during spraying
4. After pulling the trigger before pre spraying, the first gear can be used for soot blowing
5. The paint flowing through the second gear nozzle passes through the train and pre sprays air while atomizing
6. В соответствии с paint flow rate used by the customer, freely adjust the seasoning plug and control the travel of the gun needle
Adjust the paint output size and flow rate
7. В соответствии с paint flow rate used by the customer, freely adjust the seasoning plug and control the travel of the gun needle
Adjust the paint output size and flow rate
8. After use, the airflow cap and nozzle should be cleaned in a timely manner (first pour out The paint from the spray gun),
After adding the diluent, while pulling the trigger, shake the spray gun and spray as much inside as possible
The residual paint sprayed out. Затем снимите крышку воздушного потока для очистки. If the airflow cover is too dirty, it is necessary
Soak The diluent for a period of time before cleaning. После удаления верхнего отверстия и крышки воздушного потока, защитите сопло от повреждения. Clear
Poor cleaning, damaged nozzles, and damaged airflow Cap holes can all affect the atomization effect
